Remote Management - TP-Link Archer MR500 User Manual

Chapter 12
12 9

Remote Management

By default, the remote devices are not allowed to manage the router from the internet.
Follow the steps below to allow remote devices to manage the router.
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to Advanced
Management section.
3 Enable Remote Management
or enable Remote Management
if you only want to allow Remote Management via HTTP.
4 Keep the Port as the default setting.
5 If you only want to allow one specific device to manage the router, select
Following IP/MAC Address
want to allow all remote devices can access the router, select All.
6 Click Save to make the settings effective.
Tips:
1. You can find the WAN IP address of the router on
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
> System Tools >
if you want to allow Remote Management via HTTPS,
and then disable Remote Management via HTTPS
and then enter the
Basic >
Administrate Your Network
Administration page. Locate the
IP Address or
Network Map > Internet.
Set Up a Dynamic DNS Service Account
Remote
Only the
MAC Address. If you
if you want to log
76