TP-Link Archer MR500 User Manual page 68

Chapter 11
Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static
IP address for router's WAN port and synchronize your
3. In the Client IP Address
leased to the devices by the PPTP VPN server.
4. In the Username/Password
clients to the PPTP VPN server.
5. Click Save.
Step 2. Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the
as an example.
1. Go to Start > Control Panel
2. Select Set up a new connection or
System Time
filed, enter the range of IP addresses (up to 10) that can be
filed, enter the username and password to authenticate
> Network and Internet
network.
Specify Your Network Settings
with internet.
Windows built-in PPTP software
> Network and Sharing Center.
64