Local Upgrade; Back Up And Restore Configuration Settings - TP-Link Archer MR500 User Manual

Chapter 12
3. Focus on the Online Upgrade
4. Wait a few moments for the upgrading and rebooting.
12 4 2

Local Upgrade

1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
3. Go to Advanced >
4. Focus on the Device Information section. Make sure the downloaded firmware file
matches with the Hardware
5. Focus on the Local Upgrade
firmware file, and click Upgrade.
6. Wait a few moments for the upgrading and rebooting.
12 5

Back up and Restore Configuration Settings

The configuration settings are stored as a configuration file in the router. You can back
up the configuration file to your computer for future use and restore the router to a
previous settings from the backup file when needed. Moreover, if needed you can erase
the current settings and reset the router to the default factory settings.
• To back up configuration settings:
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Click Advanced
3 Click Backup to save a copy of the current settings to your local computer. A conf.
bin file will be stored to your computer.
section, and click Upgrade.
System Tools > Firmware
Version.
section. Click
> System Tools > Backup & Restore
Administrate Your Network
Upgrade.
Browse to locate the downloaded new
page.
72