Upper/Lower Case Setting; Additional Code - Inateck BCST-54 Instruction Manual

Enter Setup
8 Digits 9 Digits

Upper/Lower Case Setting

The BCST-54 can convert all letters in a barcode into upper case form, or all into lower case
form. The case of letters remains unchanged by default. You may change the setting of the
upper and lower case by reading the barcodes below.
Convert All Letters to Upper Case Convert All Letters to Lower Case
(*) Do Not Convert Letter Case

Additional Code

Barcodes like EAN-8, EAN-13, ISBN, ISSN, UPC-A and UPC-E can have additional codes. These
additional codes appear on the right of the main code and are shorter than the main code,
which can be 2-5 digits. The BCST-54 will only read the main code after you disable the
additional code.
2-digit Additional Code
You may decide whether to recognize the 2-digit additional code by set this function that is
applicable to EAB-8, EAN-13, ISBN, ISSN, UPC-A, and UPC-E. The BCST-54 defaults disabling
the recognition of 2-digit additional code.
Enable 2-Digit Additional Code (*) Disable 2-Digit Additional Code
Exit and Save
44