Table of Contents
Advertisement
Enter Setup
When under inventory mode, if you do not want to scan the same barcode twice, you may
set the scanner as "Enable Duplicate Scan Check". After the setting, the scanner will let out a
strange "beep" sound when it reads a duplicate barcode, and the duplicate barcode
scanned will not be stored in the buffer. The scanner defaults "Disable Duplicate Scan
Check". You may enable "duplicate scan check" as per your needs.
Enable Duplicate Scan Check
(*) Disable Duplicate Scan Check
Illuminative Light Control
(*) Light up When Scanning
Stay on
Stay off
Exit and Save
13
Advertisement
Table of Contents
