Table of Contents
Advertisement
Grounding
Grounding
The equipment must be grounded. Grounding reduces
the risk of static and electric shock by providing an
escape wire for the electrical current due to static build
up or in the event of a short circuit.
Pump: follow instructions in separate feed pump man-
ual, supplied.
HFR: see operation manual.
Fluid supply container: follow local code.
Solvent pails used when flushing: follow local code.
Use only conductive metal pails, placed on a grounded
surface. Do not place the pail on a nonconductive sur-
face, such as paper or cardboard, which interrupts
grounding continuity.
To maintain grounding continuity when flushing or
relieving pressure: hold metal part of the spray gun or
dispense valve firmly to the side of a grounded metal
pail, then trigger the gun or valve.
8
Flush Pumps Before
Using
Flush equipment only in a well-ventilated area. Do
not spray flammable fluids.
NOTICE
Diaphragm pumps are factory tested with water.
Thoroughly flush pumps before using to prevent
moisture contamination when pumping moisture
sensitive materials.
3A2806A
Advertisement
Table of Contents
