Table of Contents
Advertisement
Quick Links
DEVICES COVERED IN THIS DOCUMENT:
•
4600 SERIES RIM PANIC NARROW STILE EXIT DEVICE
•
4600 SERIES RIM FIRE NARROW STILE EXIT DEVICE
4950 BLADE STOP STRIKE SINGLE DOOR
4950 Blade Stop Strike Application
Single Door Panic-Rated Exit Hardware
4920 STANDARD STRIKE AND MULLION
Rev 2, Rev Date: 02/06/2020
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com
4600 SERIES RIM NARROW STILE EXIT DEVICE
OVERVIEW
APPLICATIONS
4920 STANDARD STRIKE SINGLE DOOR
INSTALLATION INSTRUCTION
4920 Strike Application
Single Door Panic-Rated Exit Hardware
(4920F Strike Standard for Fire-Rated Devices)
4920 Strike Application
Double Door Panic-Rated Exit Hardware
(4912 Strike Available for Fire-Rated Mullion
Applications)
I-ED01162
Page 1 of 8
Advertisement
Table of Contents
Related Manuals for hager 4600 Series
Summary of Contents for hager 4600 Series
- Page 1 4920 STANDARD STRIKE AND MULLION 4920 Strike Application Double Door Panic-Rated Exit Hardware (4912 Strike Available for Fire-Rated Mullion Applications) Rev 2, Rev Date: 02/06/2020 Page 1 of 8 Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com...
- Page 2 4920F Fire-Rated Strike for Standard Frame 4920 Panic Strike for Standard Frame (Purchased Separately) (Provided with Fire-Rated Device) (Purchased Separately) Tools Required Page 2 of 8 Rev 2, Rev Date: 02/06/2020 Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com...
- Page 3 A. Mark, drill and tap holes as shown on door and frame templates. Do not drill center hole on strike u ntil after strike has been mounted and adjusted at the end of the installation. Rev 2, Rev Date: 02/06/2020 Page 3 of 8 Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com...
- Page 4 4600 SERIES RIM NARROW STILE EXIT DEVICE INSTALLATION INSTRUCTION I-ED01162 3. INSTALL STRIKE A. Install strike using the two outer mounting holes. Page 4 of 8 Rev 2, Rev Date: 02/06/2020 Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com...
- Page 5 B. Hold in place and mark all 4 hole locations. C. Drill 1/8” diameter holes in 4 places and install wear strip with Flat head drive rivets (provided). Rev 2, Rev Date: 02/06/2020 Page 5 of 8 Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com...
- Page 6 A. Mount exit device using the provided screws. If using trim be sure to line up trim actuating shaft (tailpiece) with cam located on back of exit device chassis. Page 6 of 8 Rev 2, Rev Date: 02/06/2020 Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com...
- Page 7 C. If device operates properly, drill/tap and install center screw in strike (if applicable). Rev 2, Rev Date: 02/06/2020 Page 7 of 8 Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com...
- Page 8 Turn the key Figure 10-2 counter-clockwise to release the dogging. Figure 10-5 Figure 10-3 Page 8 of 8 Rev 2, Rev Date: 02/06/2020 Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com...
Need help?
Do you have a question about the 4600 Series and is the answer not in the manual?
Questions and answers