Changing The Harness Position - Evenflo NurtureMax Owner's Manual

Changing the Harness Position

4
Insert harness strap into new harness position slot.
IMPORTANT: When inserting harness straps
through the slots in the seat pad, make sure you
route them correctly through their corresponding
slots in the seat shell.
5
Make sure the harness strap is installed completely
on the splitter plate as shown, then repeat steps
2-5 for other side.
6
Tighten the harness straps by pulling the
adjustment strap on front of the restraint.
NOTE: Final adjustment of the harness straps must
be completed with the baby in the child restraint.
40