Installing the Carrier without the Base
Using Lower Anchor Connectors*
3
Feed lower anchor
connectors through belt
guides, making sure the
connector straps do not
become twisted.
4
Refer to your
vehicle owner's
manual to locate
the lower anchor
bars on your
vehicle seat, then
attach the right
hook to the right anchor bar and the left hook to
the left anchor bar.
lower anchor connector hook is fully engaged by
pulling hard on the lower anchor connector strap.
5
Using your full weight,
push the carrier into
the vehicle seat, while
pulling up on the strap
to remove all slack
from the lower anchor
connector assembly.
IMPORTANT: Make
sure both lower
anchor connectors are
connected as shown
and the straps are not
twisted.
*Not all features are available on all models. Styles may vary.
DOUBLE CHECK
Correct
that the
Incorrect
33