Installing The Carrier Without The Base Using Lower Anchor Connectors - Evenflo NurtureMax Owner's Manual

5
Push down and rotate the handle to Position 1 or 3
when traveling in a vehicle (page 18).
Installing the Carrier without the Base
Using Lower Anchor Connectors*
1
After securing the infant, place the restraint
into your vehicle. Adjust the restraint so that
the level line is level with the ground.
IMPORTANT: This infant restraint
the vehicle (p. 29).
2
Remove lower anchor
connectors from storage
pouch.
*Not all features are available on all models. Styles may vary.
32
Installing the Carrier without the
Base Using Vehicle Seat Belts
MUST face the rear of