Table of Contents
Advertisement
Q & A's Fault Finding
1. I have no picture on my TV or the picture is breaking up/freezing?
■ Ensure all connections are correct
■ Ensure the Variable Signal Booster power LED is on
■ Try adjusting the gain control on the Variable Signal Booster (turn to right to increase gain.
We suggest you start with 100% gain and reduce if in a high strength area)
■ To maximise the number and quality of channels found, you will need to retune your TV/Freeview box
when changing locations, the aerial is likely to be picking up channels from different transmitters
2. Power LED is not lit on my Variable Signal Booster
■ Ensure power switch is in the on position
■ Ensure the power source is connected correctly
■ Check the inline fuse in the power cable
3. Should I be using the Variable Signal Booster (VSB) in Line with my Gazelle Pro?
■ We recommend always using the VSB in-line as this will boost the signal quality significantly.
However, in some areas where the signal strength is good, it may not be necessary to use the VSB
4. Can I change the length of the cable supplied with my Gazelle Pro?
■ Yes, you can shorten the cable by cutting it to the required length and refitting the F connector.
Details on how to fit the F connector on page 15
■ You can lengthen the cable by using a back to back connector and some additional F cable or a flylead
■ Please note, longer cable may introduce signal losses and reduce signal quality
5. How should I clean my Gazelle Pro. Do I need to carry out any maintenance?
■ The Gazelle Pro has been designed to be maintenance and trouble free
■ If you do wish to clean your Gazelle Pro, use a sponge with mild soap and a minimal amount of water
■ Never use a powerful flow of water, power washer or solvents to clean
Support, terms & conditions
All instructions and models are
subject to change. In accordance with
policy of progressive product, the
company reserve the right to alter
specifications.
Recycle packaging where facilities
exist.
2 year guarantee
The Maxview Gazelle Pro is
guaranteed against defective parts
or workmanship for 2 years from the
time of purchase. This excludes any
malfunction caused by improper use,
accidental or malicious damage.
This does not affect your statutory
rights. Please keep your receipt of
proof of purchase.
18
Gazelle Pro Specifications
Compatibility:
SD, HD, 3D and 4K TV and DAB radio
Frequency Range:
Wideband for UHF TV and DAB radio
Gain:
Up to 19dB with Variable Signal Booster
Power:
Requires 12/24V or 230V (subject to variant)
to power Variable Signal Booster
Mounting:
Flexible Adhesive Sealant and screws or
Flexible Adhesive Sealant only
Housing:
ASA
Aerial Height:
145mm
Aerial Weight:
1.1kg
Variable Signal Booster Specifications
Compatibility:
Digital TV and DAB radio
Frequency Range:
Wideband for UHF TV and VHF radio
Power Supply:
12/24 DC (Included)
Power Consumption:
Low (50mA)
Inputs:
1
Outputs:
2
Variable Gain:
0 - 19dB
Noise:
3.5dB
Product Dimensions:
H 51 x W 142 x D 31.5mm
Advertisement
Table of Contents
