Setting Surface Controls - Frigidaire Professional Series Owner's Manual

Setting Surface
Controls
To Operate the Radiant Surface Units
Push in and turn the surface unit control knob in either direction to the desired
setting. Each surface unit provides a constant amount of heat at each setting. Start
most cooking operations on a higher setting; then turn to a lower setting to finish.
A glowing red surface unit extending beyond the bottom edge of the cooking
utensil indicates the utensil is too small for the unit. The control knob does not have
to be set exactly on a particular mark. Use the marks as a guide and adjust the
control knob as needed.
To Operate the Dual Radiant Unit Control
Set the rocker switch to the desired coil size. indicates coil only.
inner and outer coils operate. You may switch from either coil setting at any time
during the cooking process. Push in and turn the dual surface unit control knob in
either direction to the desired setting.
Do not place plastic items such as salt and pepper shakers,
spoon holders or plastic wrappings on top of the range when it is in use.
These items could melt or ignite. Potholders, towels or wooden spoons could catch
fire if placed too close to the surface unit.
8
(Left Front & Right Front)
indicates both