Table of Contents
Advertisement
4 Installation
Please read this manual carefully before starting installation and
damage to the equipment caused due to failure to comply with the descriptions in
this manual in installation or operation will be beyond the scope of the company's
quality
guarantee.
Controller installation and wiring will need the following tools. You also can choose
the right tools according to your own
5 Controller components
LCD Screen
3 |
P a g e
operation.
experience.
Function of keys present on the controller
Button
Any
START
STOP
MODE
STORE/SET
Definition
&
Function
Note
Under manual state
start the pump
To
is running, press START for 6
under manual state
second,
it will calibrate the
pump.
Under manual state when pump
To
stop pump under
is not running, press STOP for 6
manual state
second,
it will erase calibration
parameters of the pump.
If the
Auto lock
and hold MODE and STORE/SET
To switch the DPC
button together until a
PRO between manual
countdown timer stops. The
&
auto mode
controller will switch to AUTO to
MANUAL MODE.
To store the pump parameters,
Parameter
start pump under manual state
Calibration
and press STORE
&
Remark
pump
is enabled, press
Advertisement
Table of Contents
Need help?
Do you have a question about the DPC 1-1 PRO and is the answer not in the manual?