Planet LCG-300 Series User Manual page 66

Object
DHCP Service
Start IP Address
Maximum DHCP Users
Set DNS
Primary/Secondary DNS
Server
WINS
Lease Time
Domain Name
Figure 4-5-9: DHCP
By default, the DHCP Server is enabled, meaning the LoRaWAN
Gateway will assign IP addresses to the DHCP clients
automatically.
If user needs to disable the function, please set it as disable.
By default, the start IP address is 192.168.1.100.
Please do not set it to the same IP address of the LoRaWAN
Gateway
By default, the maximum DHCP users are 101, meaning the
LoRaWAN Gateway will provide DHCP client with IP address from
192.168.1.100 to 192.168.1.200 when the start IP address is
192.168.1.100.
By default, it is set as Automatically, and the DNS server is the
LoRaWAN Gateway's LAN IP address.
If user needs to use specific DNS server, please set it as Manually,
and then input a specific DNS server.
Input a specific DNS server.
Input a WINS server if needed.
Set the time for using one assigned IP. After the lease time, the
DHCP client will need to get new IP addresses from the LoRaWAN
Gateway
Default is 1440 minutes.
Input a domain name for the LoRaWAN Gateway
Default is Planet.
- 66 -
Industrial LoRaWAN Gateway
Description
LCG-300 series