Technical Data - BorMann PRO BBP4015 Manual

EN
Fig.25-27
1. Water hose
2. Water absorption strainer
3. Tank
4. Cap
3. To install the strainer, follow the uninstall procedure in reverse.
Cleaning lever cock strainer (Fig.28-29)
1. Loosen the nut on the handle grip anticlockwise as far as it can go and remove the lever cock
strainer from hole of the handle grip.
2. Remove dirt and debris from the inside of the strainer.
Fig.28-29
1. Nut on the handle grip
2. Handle grip
3. Lever cock strainer
3. To install the strainer, follow the uninstall procedure in reverse.
Cleaning tank strainer (Fig.30-31 )
1. Turn it anticlockwise to open the Chemical tank lid and take out the tank strainer to remove dirt
and debris from the inside of the strainer.
2. To install the strainer, follow the uninstall procedure in reverse.
Fig. 31
1. Chemical tank lid
2. Tank strainer
Storage
CAUTION: Store the Garden Sprayer out of reach of children, in an indoor locale that does not freeze, is away from direct sunlight, and has good ventilation.
Take full care in storing the sprayer, as, in some cases, the plastic components will deteriorate markedly if left in direct sunlight for a prolonged period;
moreover, product caution labels will discolour and/or come off.
NOTICE:
• Wash the equipment using the after-use maintenance procedures.
• In particular, when storing during the winter season, breakdown or damage may occur due to freezing of residual chemical and/or washing water in the
pump. Run the pump until all residual liquid has exited from the nozzle, check to make sure there is no more residual liquid, turn the sprayer switch OFF,
and then store the sprayer away.
Hook the metal buckle (Fig. 32)
You can hook the metal buckle onto the tank after use or before storing.

Technical data

Battery type:
Tank capacity:
Water flow:
Max. Pressure:
Working current:
Spray nozzle hole:
Spray pole length:
13
20V Li-ion
15L
≥1.3L/min (with twin spray nozzle)
≥0.3Mpa
1.5A
1.6mm
800mm (two shafts)
WWW.BORMANNTOOLS.COM
NOTICE: This is a filter used to prevent dirt and
dust (that for some reason has got passed the
tank strainer into the tank) from getting into the
pump. If the water absorption strainer becomes
blocked, spraying will deteriorate, and there is a
risk of the pump being adversely affected.
NOTICE: To maintain the optimal performance,
clean the strainer periodically.
NOTICE: Spraying deteriorates if the lever cock
strainer becomes blocked.
NOTICE: Firmly attach components to ensure
there is no leaking.
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance and
safety of the products. The parts described / illustrated in the pages of the manual that you hold in
your hands may also concern other models of the manufacturer's product line with similar features
and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection,
repair or replacement work, including maintenance and special adjustments, must only be carried
out by technicians of the authorized service department of the manufacturer.