Operation
Cancelling a cooking
programme
Touch the sensor control for the
selected function or the sensor
control.
When
Cancel process
display, confirm with OK.
The oven compartment heating and
lighting will then switch off. Any cooking
durations set will be deleted.
The main menu will appear.
Pre-heating the oven
The
Booster
is used in conjunction with
certain functions to quickly pre-heat the
oven.
It is only necessary to pre-heat the oven
in a few instances.
Most dishes can be placed in the
cold oven to make use of the heat
produced during the heating-up
phase.
Pre-heat the oven when cooking the
following food with the following
functions:
- Dark bread dough as well as beef
sirloin joints and fillet with the
plus
,
Moisture plus
Conventional heat
- Cakes and pastries with a short
cooking duration (approx. 30 minutes
or less) as well as delicate items (e.g.
sponge) with the
function (without the
50
appears in the
Fan
and
functions
Conventional heat
Booster
function)
Booster
The
Booster
pre-heat the oven compartment.
This function is switched on as the
factory default setting for the following
functions (
|
Booster
On
-
Fan plus
-
Conventional heat
-
Auto roast
-
Moisture plus
If you set a temperature above 100 °C
and the
Booster
a rapid heating-up phase heats the
oven to the set temperature. The top
heat/grill element and the ring heater
element come on together with the fan.
Delicate items (e.g. sponge or
biscuits) will brown too quickly on
the top if the
used.
Switch off the
these items.
Switching off Booster for a cooking
process
Select the
selecting the desired operating mode.
The
Booster
during the heating-up phase. Only the
heater elements for the selected
operating mode are used to pre-heat
the oven compartment.
If you then want to restart a cooking
process with the
select the
switch the function on again.
function is used to quickly
Further
|
Settings
):
function is switched on,
function is
Booster
function for
Booster
|
setting before
Booster
Off
function is switched off
function,
Booster
Booster
|
On
setting to
|