Table of Contents
Advertisement
Selecting a function or
operating mode
The sensor controls for the functions
and operating modes (e.g.
are located above the display (see
"Controls" and "Settings").
Touch the sensor control for the
desired function.
The sensor control on the fascia panel
lights up orange.
For functions and operating modes:
set values such as the temperature.
Under
Further
: scroll through the
lists until you reach the desired menu
option.
Confirm with OK.
Changing the function
You can change to another function
during a cooking programme.
The sensor control for the previously
selected function lights up orange.
Touch the sensor control of the new
function or operating mode.
The new function appears in the display
with its corresponding recommended
values.
The sensor control for the new function
lights up orange.
Under
, scroll through the
Further
lists until you reach the desired menu
option.
Entering numbers
Numbers that can be changed are
highlighted.
)
Further
Touch the or arrow buttons or
Tip: If you press and hold an arrow
button, the numbers continue scrolling
automatically until you release the arrow
button.
Confirm with OK.
The changed number is now saved.
This will take you back to the previous
menu.
Activating MobileStart
Select the sensor control to
The sensor control lights up. You
can operate your oven remotely with the
Miele app.
Using the appliance
swipe to the right or left in the
area until the desired number
is highlighted.
activate MobileStart.
Directly operating the oven takes
priority over operating it via the remote
control function on the app.
You can use MobileStart as long as
the sensor control is lit up.
21
Advertisement
Table of Contents
