Table of Contents
Advertisement
Dimensions
Weight
Connectors
Note 1: If the digital output is set to 10-bit, the gain setting of more than 2dB may cause the
Break in histogram.
Note 2: If the line rate becomes longer, the dark current will increase and as the result, the
black level will be unstable.
Note 3: 12P input and Camera Link input cannot be used at the same time.
Note 4: 12P input and Camera Link input cannot be used at the same time.
Note 5: The mentioned specifications is guaranteed when the cable and connector to be used are
ones JAI suggests.
Note 6: The above specifications are subject to change without notice.
11.2
Camera Spectral sensitivity
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
90(W) x 90(H) x 120(D) mm (without connector and lens mount
protrusion)
1050 g
Camera Link : 10226-1A10PL x2
Hirose 12-Pin : HR10A-10R-12PB or equivalent
LQ-201CL CAMERA Sensitivity
300
400
500
wavelength (nm)
Fig. 27 Camera Spectral sensitivity
LQ-201CL
600
700
800
66
Bch
Gch
Rch
NIRch
900
1000
Advertisement
Table of Contents
