available. It allows the user to program the line rate, in order to match the speed of the object
being scanned. In the No-shutter mode, the exposure time is directly proportional to the line rate
(T
= 1/line rate)
exp
Settings:
Associated functions:
Applicable modes:
Note
The data can be stored in the camera memory for next start up.
7.19
Command MAV – Chromatic Aberration Control
This command enables or disables chromatic aberration adjustment for each channel.
Settings:
7.20
Command MAVCG – Chromatic Aberration Select
This command selects the lens to be used if the compensation data is stored. The data for three
lenses can be stored and used.
Settings:
Note: Name of User I, 2 or 3 can be modified to particular lens type name.
7.21.
Command NR - Noise Reduction
Noise levels less than 16 LSB (4LSB) which are superimposed on the video signal will be
eliminated. The deterioration of spatial frequency is minimized. The improvement of
signal-to-noise ratio will be 3dB as the maximum although it depends on the object.
Figure in ( ) is for 8-bit output.
Settings:
7.22
Command OS1,2,3,4,5,6 – Camera Link Video Output Select
Settings:
7.22
Command PBC – Enable Pixel Black (FPN) Correction
This command enables (or disables) the "pixel black level" correction function, which compensates
for Dark Signal Non Uniformity / Fixed Pattern Noise (DSNU / FPN) for individual pixels.
LQ-201CL
Full resolution/Binning
2544 to 1260000, in 11.9 ns increments
Sub-sampling/Windowing
1520 to 1260000 in 11.9 ns increments
Trigger origin, TG=0
No-shutter with internal trigger
Shutter-Select with internal trigger
= OFF, 1= ON
0= User1 Lens
1= User2 Lens
2= User3 lens
0=ON, 1=OFF
OS1 0= Rch 1= Gch 2=Bch 3= NIR ch (Default 0)
OS2 0= Rch 1= Gch 2=Bch 3= NIR ch (Default 1)
OS3 0= Rch 1= Gch 2=Bch 3= NIR ch (Default 2)
OS4 0= Rch 1= Gch 2=Bch 3= NIR ch (Default 3)
OS5 0= Rch 1= Gch 2=Bch 3= NIR ch (Default 0, only 8-bit)
OS6 0= Rch 1= Gch 2=Bch 3= NIR ch (Default 0, only 8-bit)
47
(TR=0)
(TR=1)