Command List - JAI LQ-201CL User Manual

Transmit the request command to camera:
The status of the camera's settings can be queried by transmitting NN?<CR><LF>, where NN is
any one of the commands.
The camera will return the current setting data.
e.g.
Send to camera: TR? <CR><LF>
Camera response:
8.2.

Command list

Command
Name
A – General settings and useful commands.
EB Echo Back
Camera Status
ST
Request
Online Help
HP
Request
Firmware
Program
VN
Version
Request
FPGA Program
PV Version
Request
Camera ID
ID
Request
Model Name
MD
Request
UD User ID
B - Line Rate, Exposure
LR Line Rate
One-push auto
AR
line rate set
Auto line rate
AL reference
level
R/B/NIR
Exposure
EI
interlocked
with G
LQ-201CL
TR=3<CR><LF>
Format
EB=[Param.]<CR><LF>
EB?<CR><LF>
ST?<CR><LF>
HP?<CR><LF>
VN?<CR><LF>
PV?<CR><LF>
ID?<CR><LF>
MD?<CR><LF>
UD=[Param.]<CR><LF>
UD?<CR><LF>
LR=[Param.]<CR><LF>
LR?<CR><LF>
AR=[Param.]<CR><LF>
AR?<CR><LF>
AL=[Param.]<CR><LF>
AL?<CR><LF>
EI=[Param.]<CR><LF>
EI?<CR><LF>
Parameter
0=Echo off, 1=Echo on
Full resolution
2544 to 1260000 clocks
Sub-sampling/Windowing
1520 to 1260000 clocks
- 1 clock is 11.9 ns
0=Activate one-push auto line
rate set
0 to 1023
0=Off (independent)
1=On (interlocked)
53
Remarks
Returns character
sent to the camera.
Off at power up
Display current
settings of all
functions
Get a list of available
commands
3 digits
Example:
100 = Version 1.00
3 digits
Example:
100 = Version 1.00
Returns the camera's
ID (?). Factory
setting.
Returns the camera's
model name. Factory
setting.
User definable field.
Up to 16 characters.
Only valid for TG=0
Only valid for TG=0
At 10-bit
Only valid for TR=1