Heartway Medical Products S11E User Manual page 23

19. Operating in rain, snow, salt, mist conditions and on icy or slippery surfaces may
have an adverse affect on the electrical system.
20. Never sit on your scooter when it is being used in connection with any type of lift or
elevation product. Your scooter is not designed with such use in mind and any damage
or injury incurred from such use is not the responsibility of Heartway.
21. Surfaces of the power scooter that can come into direct contact with the occupant's
skin and/or assistant's skin during normal use and that are within occupant reach shall
not exceed 41˚C. The motor surface can reach temperatures greater than 41˚C after
driving. Do not touch these parts when disassembling the scooter or wait until the
motor is cooled down.
22. The programming of the controller shall only be carried out by personnel, which is
authorized by his manufacturer. A wrong programming can result in safety hazards for
the occupant!
23. Drive-wheel needs to be switched to engaged-mode while transporting the power
scooter with a car or airplane.
24. Surface temperatures can increase when exposed to external sources of heat.
25. Can only go up obstacles in the direction of progress. Forward & Backward obstacle
with run up.
IMPORTANT NOTICE
Heartway Medical Product has designed and engineered power scooter to provide maximum
utility. However, under no circumstances should you modify, add, Disconnect battery, or
disable any part or function of your power scooter. Personal injury and damage to the power
scooter may result.
1. Do not modify your power scooter in any way not authorized by Heartway. Do not use
accessories if they have not been tested or approved for Heartway products. Changing
of controller parameter shall be only performed by authorized technicians due to the
safety concern.
2. Get to know the feel of your power scooter and its capabilities. Heartway recommends
that you perform a safety check before each use to make sure your power scooter
operates safely.
Inspections prior to using your power scooter:
1. If equipped with pneumatic tires, please check for proper tire inflations.
2. Please check all electrical connections and make sure they are tight and not corroded.
3. Please check all harness connections and make sure they are secured properly.
4. Please check the brakes.
21