NEC NEAX2000 IVS2 General Description Manual page 90

Q-SIG Circuit Switched Basic Call - ETSI Version
Q-SIG Circuit Switched Basic Call - ETSI Version
Remote Hold
Remote PIM
Reserve Power
Resident System Program
Return Message Schedule Display
Room Cutoff
Page 66
This feature provides a tie-line connection between NEAX2000 IVS
Q-SIG PBX using the ISDN protocol in conformity with ETS 300 172 standardized
by ETSI (European Telecommunications Standards Institute).
This feature allows a Multiline Terminal user to hold it on the line button of
transferred terminal, by pressing the Hold key.
When the system has two or more PIMs, the PIMs can be installed separately by T1
digital interface. A maximum of 3 PIMs can be installed apart at the remote site.
This feature provides backup power from a 24V battery source in the event of a
commercial power failure.
This feature provides the installers a simple procedure to have the system generate
system data according to the system hardware configuration, thereby providing
immediate operation and shorter programming time. When activated, the system scans
hardware configuration (such as line/trunk card slot location) and assigns system data
(such as extension numbers, trunk numbers, etc.) according to a predetermined
generic program assignment.
This feature permits any station user to register his Return Schedule from his phone
when he leaves his desk or the premises, and have the Return Schedule displayed on a
calling Multiline Terminal with a Liquid Crystal Display (LCD) during his absence.
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument,
or Property Management System (PMS) terminal, or guest room telephones using a
special access code, to temporarily restrict guest room telephones from making
unauthorized calls when guests are away from their room, and when rooms are in
Check Out status.
Chapter 5 Feature Description
2
and the other
2
NEAX2000 IVS General Description
NDA-24293, Issue 2