NEC NEAX2000 IVS2 General Description Manual page 63

Chapter 5 Feature Description
Account Code
Add-On Module
Alarm Indications
Alphanumeric Display
Analog Port Adapter
2
NEAX2000 IVS General Description
NDA-24293, Issue 2
This feature, when used with Station Message Detail Recording (SMDR), allows
station users and Attendants to enter a cost accounting or client billing code (up to 16
digits) into the system.
This feature allows the Add-On Module to be combined with a Multiline Terminal
when there are insufficient line or trunk keys provided at the Multiline Terminal.
When the EDW-48-2 unit keys are programmed as line/trunk keys, the additional 25
lines/trunks and the existing lines/trunks set for the Multiline Terminal can be
accessed directly (maximum of 49 lines/trunks). The station speed dialing function
can be assigned for all keys on the EDW-48-2 unit. Also, one of the last 3 keys can be
used as a Day/Night change key.
Faults are indicated by the Major/Minor (MJ/MN) lamps located on the AC/DC
Power Supply and, optionally, an external alarm display unit. Station Application not
applicable.
The ETJ-16DC-1 Multiline Terminals are each equipped with a 2-line, 20-character
Liquid Crystal Display (LCD). These displays are used to provide alphanumeric
information including clock/calendar and call processing information.
Station Application All Multiline Terminals with an LCD display.
This feature allows an APR-J or APA-J unit combined with a Multiline Terminal to
connect to an analog terminal such as an analog telephone, Modem, and PC with
built-in Modem. There are two communication modes for the terminal connected via
the Analog Port Adapter as shown below:
1. Single Port Mode
A Multiline Terminal and an analog terminal share the same port. In this mode,
the Multiline Terminal and the analog terminal cannot be used simultaneously.
2. Dual Port Mode
A Multiline Terminal and an analog terminal use different ports. In this mode, the
Multiline Terminal and the analog terminal can be used simultaneously.
Page 39