schmersal PSC1-C-10 Series Installation Manual page 171

Installation manual
2 normally open Monitored door monitoring PL e
contact + 2 normally
closed contact time
monitored
3 normally closed Door monitoring for
contact increased requirement
3 normally closed Monitored door monitoring PL e
contacts time
monitored
Two-handed operation
Switch type Remark
2 change-over contacts Two-hand button for
increased requirement
2 normally open Monitored two-hand button Type III A PL c
contacts
Note:
On these input elements there is a fixed pulse assignment that the user cannot change!
Light curtain
Switch type Remark
2 normally closed Light curtain for increased
contact requirement
2 normally closed Monitored light curtain
contacts time
monitoring
1 normally open contact Light curtain for increased
+ 1 normally closed requirement
contact
1 normally open contact Monitored light curtain
+ 1 normally closed
contact time monitored
Operating mode selector switch
Switch type Remark
2 positions Monitored operating mode
selector switch
3 positions Monitored operating mode
selector switch
Safety instructions:
•
On a state change on the switch, it is to be ensured by the SafePLC2 program to be written
that the outputs on the module are deactivated
PSC1-C-10 Installation manual V2.6
Version: 57E
PL e
Category categorisation SIL categorisation
Type III C PL e
Category categorisation SIL categorisation
PL e
PL e
PL e
PL e
Category categorisation SIL categorisation
PL e
PL e
SIL 3
SIL 3
SIL 3
SIL3
SIL1
SIL 3
SIL 3
SIL 3
SIL 3
SIL 3
SIL 3
Page 171 of 173