Table of Contents
Advertisement
Operating instructions
Safety-monitoring module
Operating instructions. . . . . . . . . . . .pages 1 to 10
EN
Original
Content
1
About this document
1.1 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.2 Target group: authorised qualified personnel. . . . . . . . . . . . . . . . . .1
1.3 Explanation of the symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.4 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.5 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.6 Warning about misuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.7 Exclusion of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
2.1 Ordering code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.2 Special versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.3 Destination and use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.5 Derating / electrical lifespan of safety contacts . . . . . . . . . . . . . . . .3
2.6 Safety classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3
3.1 General mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3.2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4
4.1 General information for electrical connection. . . . . . . . . . . . . . . . . .4
4.2 Coding of connecting terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
5
5.1 Description of the terminals and LED indications . . . . . . . . . . . . . .4
5.2 Adjustable applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5.3 Changing setting or application . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
6
6.1 LED indicators / malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
7
7.1 Possible applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
7.2 Application example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
7.3 Start configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
7.4 Sensor configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8
8.1 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
8.2 Functional testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
8.3 Behaviour in the case of faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
8.4 Setting report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
8.5 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
9
9.1 Disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
9.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
10.1 Wiring/circuit information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
1. About this document
1.1
Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety-monitoring module. The
operating instructions must be available in a legible condition and a
complete version in the vicinity of the device.
1.2
Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only.
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation.
The machine builder must carefully select the harmonised standards
to be complied with as well as other technical specifications for the
selection, mounting and integration of the components.
1.3
Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information.
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions.
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine.
EN
SRB-E-301MC
1
Advertisement
Table of Contents
Related Manuals for schmersal SRB-E-301MC
Summary of Contents for schmersal SRB-E-301MC
-
Page 1: Table Of Contents
Operating instructions Safety-monitoring module SRB-E-301MC Wiring examples 7.1 Possible applications ........6 7.2 Application example. -
Page 2: Appropriate Use
0.25 … 1.5 mm² as all prevailing safety regulations and accident prevention rules. (Signal contact 41/42, normally-closed contacts parallel) Further technical information can be found in the Schmersal SRB-E-301MC20- ➀ catalogues or in the online catalogue on the Internet: No. -
Page 3: Derating / Electrical Lifespan Of Safety Contacts
Operating instructions Safety-monitoring module SRB-E-301MC Electrical characteristics: Derating / electrical lifespan of safety contacts Rated operating voltage U 24 VDC –15% / +20%, No derating with individual installation of modules. residual ripple max. 10% 24 VAC –15% / +10% Derating on request if several modules are installed one after the... -
Page 4: Mounting
Operating instructions Safety-monitoring module SRB-E-301MC 3. Mounting 5. Operating principle and settings General mounting instructions Description of the terminals and LED indications Mounting: snaps onto standard DIN rails to IEC 60715. Function LED Function Hook bottom of enclosure in DIN rail and push down until it engages in... -
Page 5: Adjustable Applications
Operating instructions Safety-monitoring module SRB-E-301MC Adjustment of application using rotary “mode” switch • Open front transparent cover (see fig.). • Opening is carried out by lifting side with lock. • Select desired application using rotary mode switch by turning up or down (see 5.3). -
Page 6: Diagnostic
Operating instructions Safety-monitoring module SRB-E-301MC 6. Diagnostic Application example LED indicators / malfunctions Dual-channel control, shown for a guard door monitor with two position switches where one has a positive break contact; LED Function Display type with external reset button •... -
Page 7: Start Configuration
Operating instructions Safety-monitoring module SRB-E-301MC Start configuration Sensor configuration 7.3.1 External reset button Single channel signal processing • The external reset button is integrated in the feedback circuit in series. S11 S21 +24 VDC • The manual start or the activation of the module occurs when the button is pressed (not when it is released!). -
Page 8: Set-Up And Maintenance
Operating instructions Safety-monitoring module SRB-E-301MC 8. Set-up and maintenance Maintenance A regular visual inspection and functional test, including the following Commissioning steps, is recommended: The safety relay module features protection class IP54 for installation 1. Check the correct fixing of the safety-monitoring module in a switch cabinet. -
Page 9: Eu Declaration Of Conformity
Safety-monitoring module SRB-E-301MC 11. EU Declaration of conformity EU Declaration of conformity Original K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. - Page 10 K. A. Schmersal GmbH & Co. KG Möddinghofe 30, D - 42279 Wuppertal Postfach 24 02 63, D - 42232 Wuppertal Phone: +49 - (0)2 02 - 64 74 - 0 Telefax: +49 - (0)2 02 - 64 74 - 1 00 E-Mail: info@schmersal.com...
Need help?
Do you have a question about the SRB-E-301MC and is the answer not in the manual?
Questions and answers