CLEANING THE THERMOMETER
Clean the exterior of both the 9020 and the optional wall mount as
needed. Wipe all surfaces with a clean cloth, dampened with warm water
and a mild detergent or germicidal cleaner (see the table below for
acceptable cleaning agents).
•
As some solutions may stain, try a small test area first.
Make sure that the cloth is damp, but not wet.
•
•
Do not allow cleaning solution to run inside of the thermometer.
•
Never immerse the thermometer in the cleaning solution.
CLEANING AGENT
Ammonium
Bleach (50%)
Sproricidin®
MetriSpray™
Cidex
Detergent (mild)
Isopropyl Alcohol
Lysol
Refer to the WELCH ALLYN 9020 Infrared Tympanic Thermometer
Technical Manual for the procedure to sterilize the thermometer.
Sporicidin is a registered trademark of Sporicidin International (800) 424-3733. MetriSpray is a trademark
of Metrex Research Corporation (800) 841-1428.
LENS
THERMOMETER
9020 Users' Manual
WALL MOUNT
19