Using Computer Setup To Reset Cmos - HP Compaq d330 DT Troubleshooting Manual

✎

Using Computer Setup to Reset CMOS

✎
Troubleshooting Guide
6. Reconnect the external devices.
7. Plug in the computer and turn on power.
You will need to reset your passwords and any special system setups
along with the date and time.
See the Desktop Management Guide for further instructions on
reestablishing passwords. For instructions on Computer Setup, see the
Computer Setup (F10) Utility Guide.
To reset CMOS through Computer Setup, you must first access the
Computer Setup Utilities menu.
When the Computer Setup message appears in the lower-right corner
of the screen, press the
screen, if necessary.
If you do not press the
must turn the computer off, then on again, to access the utility.
A choice of five headings appears in the Computer Setup Utilities
menu: File, Storage, Security, Power, and Advanced.
To reset CMOS to the factory default settings first set time and date,
then use the arrow keys or the
and Exit. This resets the soft settings that include boot sequence
order and other factory settings. It will not, however, force hardware
rediscovery.
See the Desktop Management Guide for further instructions on
reestablishing passwords. For instructions on Computer Setup, see the
Computer Setup (F10) Utility Guide.
www.hp.com
Password Security and Resetting CMOS
F10 Enter
key. Press
F10
key while the message is displayed, you
Tab
key to select File > Set Defaults
to bypass the title
B–5