Solving General Problems - HP Compaq d330 DT Troubleshooting Manual

Solving General Problems

Solving General Problems
Problem
Computer appears
locked up and will not
turn off when the power
button is pressed.
Computer will not
respond to USB
keyboard or mouse.
Ä
CAUTION: When attempting to resume from standby mode, do not hold down the
power button for more than four seconds. Otherwise, the computer will shut down and
you will lose your data.
Computer date and
time display is incorrect.
Computer appears to
pause periodically.
Cursor will not move
using the arrow keys on
the keypad.
Troubleshooting Guide
You may be able to easily resolve the general problems described in
this section. If a problem persists and you are unable to resolve it
yourself or if you feel uncomfortable about performing the operation,
contact an authorized dealer or reseller.
Cause
Software control of the
power switch is not
functional.
Computer is in
standby mode.
RTC (real-time clock)
battery may need to be
replaced.
✎
Connecting the
computer to a live
AC outlet prolongs
the life of the
RTC battery.
Network driver is loaded
and no network
connection is established.
The Num Lock key
may be on.
www.hp.com
Troubleshooting Without Diagnostics
Solution
Press and hold the power button for at
least four seconds until the computer
turns off.
Press the power button to resume from
standby mode.
First, reset the date and time under
Control Panel (Computer Setup can
also be used to update the RTC date
and time). If the problem persists,
replace the RTC battery. See the
Hardware Reference Guide for
instructions on installing a new
battery, or contact an authorized
dealer or reseller for RTC battery
replacement.
Establish a network connection, or
use Computer Setup or Microsoft
Windows Device Manager to disable
the network controller.
Press the Num Lock key. The
Num Lock light should not be on if
you want to use the arrow keys. The
Num Lock key can be disabled (or
enabled) in Computer Setup.
2–5