Figure 6 Installing The Pr-300 Polarity Reversal And City Tie Module; Table 5 Pr-300 Polarity Reversal And City Tie Module Connectors And Jumpers - Secutron MR-401 Installation And Operation Manual

The Trouble Transmit signal to the PR-300 can be programmed to delay AC power fail 0, 1, 2,
or 3 hours if this is the only system trouble.
Figure 6 Installing the PR-300 Polarity Reversal and City Tie Module

Table 5 PR-300 Polarity Reversal and City Tie Module Connectors and Jumpers

Item Setting
P1 Connect cable to P8 on the Main Board of the MR-401
JW4 Not used. Keep jumper intact.
Note: If using a PR-300 remember to remove JW7 on the main board. For the location
of JW7 on the main board see Figure 3.
Mounting hole for
#6-32 screws
Mounting hole for
#6-32 screws
PR-300
Reverse polarity and city
tie module PR-300.
Mounted on hex spacer
with two screws provided
23