Product Information; System Features - HP c8000 Technical Reference Manual

This chapter provides an overview of the HP workstation c8000, including:
System Features, page 1-1
Physical Characteristics, page 1-4
Power Specifications, page 1-5
Front Panel, page 1-7
Rear Panel, page 1-9

System Features

The HP workstation c8000 is available in several different configurations. To obtain more
information for your system, see one of the following:
Boot Console Handler (BCH) Information menu (page 2-6).
Features and overview at:
Supported accessories and components at:
Feature
Processor
Firmware
Operating system
Main memory
Hard drive(s)
Technical Reference Guide
http://www.hp.com/workstations/risc/c8000
http://partsurfer.hp.com
Description
One or two HP PA-8800 processor modules
8 MB flash EEPROM
Configured using Boot Console Handler (BCH)
HP-UX 11i v1
Capacity:
• Minimum 1 GB (2 x 512 MB)
• Supports up to 32 GB (8 x 4 GB)
Type: PC2100 ECC registered DDR266 DIMMs
Slots: Eight DIMM slots
Peak bandwidth: up to 8.5 GB/sec
For memory loading order and detailed memory installation instructions,
see "Memory Modules" on page 3-10.
May include the following internal drives:
• Up to two Ultra ATA-133 IDE hard drives
• Up to four LVD Ultra 320 SCSI hard drives with 68-pin interface
connector plus four-pin standard power connector

Product Information

1
1–1