www.ti.com
2.3
Connecting to CC32000-LAUNCHXL
2.3.1 Configuration required on CC3200-LAUNCHXL
No changes are required. CC3200AUDBOOST should be connected to CC3200-LAUNCHXL with the
default configurations. Ensure the following:
1. Once the binaries are flashed, remove jumper J15 on SOP2 of the CC3200-LAUNCHXL, and reset the
board (refer to the green circle in
2. Jumpers J2 and J3 should be closed (refer to the blue circle in
SWRU383 – September 2014
Submit Documentation Feedback
Figure
2-2).
Figure 2-2. CC3200-LAUNCHXL Configuration
Copyright © 2014, Texas Instruments Incorporated
Connecting to CC32000-LAUNCHXL
Figure
2-2).
Hardware Overview
7