Advertisement
Quick Links
AMC1303, AMC1306, and AMC1336 Evaluation Module
This user's guide describes the characteristics, operation, and use of the AMC13xxEVM (AMC1303EVM,
AMC1306EVM, and AMC1336EVM). A complete circuit description as well as schematic diagram and bill
of materials are included.
The following related documents are available through the Texas Instruments web site at www.ti.com.
Device
AMC1303
AMC1306
AMC1336
1
2
3
4
5
Layout, BOM, and Schematic
1
AMC13xxEVM Schematic: Analog Input Section
.....................................................................................................................
2
Digital I/O
...................................................................................................................
3
...................................................................................................................
4
DVDD Input
5
AMC13xxEVM Silkscreen
6
AMC1306EVM Schematic
1
Related Documentation
2
J2: Analog Inputs
3
J1: Analog Inputs
4
J4: AMC1303EVM Digital Output
5
J4: AMC1306EVM, AMC1336EVM Digital Output
6
AMC13xxEVM Bill of Materials
SBAU271B - January 2017 - Revised December 2019
Submit Documentation Feedback
Table 1. Related Documentation
Small, High-Precision, Reinforced Isolated Modulator with Internal Clock
AMC1306x Small-Size, Reinforced Isolated Delta-Sigma Modulators
AMC1336 Small, High-Precision, Reinforced Isolated Delta-Sigma Modulator for Voltage Sensing
...............................................................................................................
..............................................................................................................
..............................................................................................................
..............................................................................................................
..............................................................................................
..................................................................................................
..................................................................................................
.....................................................................................................
............................................................................................................
............................................................................................................
..........................................................................................
.............................................................................................
Copyright © 2017-2019, Texas Instruments Incorporated
SBAU271B - January 2017 - Revised December 2019
Description
Applications
Contents
List of Figures
........................................................................
List of Tables
......................................................................
AMC1303, AMC1306, and AMC1336 Evaluation Module
User's Guide
2
2
3
4
7
3
3
4
5
7
9
1
5
5
6
6
8
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments AMC1303
Summary of Contents for Texas Instruments AMC1303
-
Page 1: Table Of Contents
This user’s guide describes the characteristics, operation, and use of the AMC13xxEVM (AMC1303EVM, AMC1306EVM, and AMC1336EVM). A complete circuit description as well as schematic diagram and bill of materials are included. The following related documents are available through the Texas Instruments web site at www.ti.com. Table 1. Related Documentation Device... -
Page 2: Evm Overview
The analog input to the AMC13xxEVM is routed from a two-wire screw terminal screw at J1. This screw terminal gives the user access to the inverting and non-inverting inputs of the AMC1303, AMC1306, or AMC1336 depending on which device is installed on the board. -
Page 3: Digital Interface
A 5 MHz to 20 MHz modulator clock can be applied to J4.2 referenced to J4.3. For the AMC1303, pin 7 is the modulator clock output which can be monitored at J4.2 relative to J4.3. -
Page 4: Power Supplies
JP1 is covering pins 1-2. The AVDD supply should be between 3 and 5.5 V . The input power scheme is shown in Figure Figure 3. AVDD Input AMC1303, AMC1306, and AMC1336 Evaluation Module SBAU271B – January 2017 – Revised December 2019 Submit Documentation Feedback Copyright © 2017–2019, Texas Instruments Incorporated... - Page 5 EVM. The EVM uses the ±250 mV versions of the devices for the AMC1303 and AMC1306. The EVM uses ±1 V for the AMC1336.
- Page 6 Figure 1 Table 3 details. The linear analog input range, (VIN+) – (VIN–), is ±250 mV for the AMC1303 and AMC1306. The linear analog input range, (VIN+) – (VIN–), is ±1 V for the AMC1336. For the AMC1303 and AMC1306, as the input voltage approaches the maximum input level of +250 mV, the 1s density of the modulator output will approach 92%.
- Page 7 AMC13xxEVM PCBs. Printed Circuit Board Layout Figure 5. AMC13xxEVM Silkscreen SBAU271B – January 2017 – Revised December 2019 AMC1303, AMC1306, and AMC1336 Evaluation Module Submit Documentation Feedback Copyright © 2017–2019, Texas Instruments Incorporated...
- Page 8 Not Installed C4, C5, C8 CAP, CERM, 10 pF, 50 V, +/- 5%, C0G/NP0, 0603 Not Installed AMC1303, AMC1306, and AMC1336 Evaluation Module SBAU271B – January 2017 – Revised December 2019 Submit Documentation Feedback Copyright © 2017–2019, Texas Instruments Incorporated...
- Page 9 AMC1306EVM schematic. Figure 6. AMC1306EVM Schematic Trademarks All trademarks are the property of their respective owners. SBAU271B – January 2017 – Revised December 2019 AMC1303, AMC1306, and AMC1336 Evaluation Module Submit Documentation Feedback Copyright © 2017–2019, Texas Instruments Incorporated...
- Page 10 Changed clock output to clock input in CLOCK row of J4: AMC1306EVM, AMC1336EVM Digital Output table ..................• Changed AMC13xxEVM Bill of Materials table Revision History SBAU271B – January 2017 – Revised December 2019 Submit Documentation Feedback Copyright © 2017–2019, Texas Instruments Incorporated...
- Page 11 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 12 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
- Page 13 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
- Page 14 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
- Page 15 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...
- Page 16 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...
Need help?
Do you have a question about the AMC1303 and is the answer not in the manual?
Questions and answers