Next Steps - HP ProCurve 9315M Quick Start Manual

7. Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device's flash memory.

Next Steps

Once the initial installation steps are completed, you may want to use the following information:
For this Information:
Configuring and managing
Redundant Management
modules
Downloading Routing Switch
software updates
Proceeding with enabling
routing protocols and
configuring specific features
on the Routing Switches
Finding the configuration
details for all routing
protocols and advanced
VLAN features
To secure management
access to your routing
switch, and to protect against
Denial of Service (DOS)
attacks
To learn more about a
specific CLI command and
its syntax
*
This information is also included in the latest Routing Switch release notes, available only on the HP ProCurve website.
(See below.)
To access the HP ProCurve Website
Go to:
http://www.hp.com/go/hpprocurve
Click on technical support, then manuals.
Refer to the:
Installation and Getting Started
Guide (for Software Release 7.5.x or
greater)
Installation and Getting Started
Guide (for Software Release 7.5.x or
greater)*
Chapter titled "Configuring Basic
Features" in the Installation and
Getting Started Guide
Advanced Configuration and
Management Guide
Security Guide
Command Line Interface Reference
On the:
Documentation CD-ROM (kit # 5065-
6591, May 2002; or a later version.)
— or —
HP ProCurve Website (see below).
— Same —
— Same —
— Same —
— Same —
— Same —
Installation
2 - 31