HP ProCurve 9315M Quick Start Manual page 50

Quick Start Guide
USING THE WEB MANAGEMENT INTERFACE
To configure a chassis slot for a module:
1. Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2. Click on the Module link to display the Module panel, as shown in the following example.
3. Click the Add Module link to display the following panel.
4. Select slot number from the Slot pulldown menu.
• Slots on the HP 9304M are numbered 1 – 4, from top to bottom.
• Slots on the HP 9308M are numbered 1 – 8, from left to right.
• Slots on the HP 9315M are numbered 1 – 15, from left to right.
5. Select the module type from the Module Type pulldown menu.
6. Click the Add button to save the change to the device's running-config file.
2 - 30