Table of Contents
Advertisement
Figure 51. Removing a backplane
Next steps
Install a hard drive
backplane.
Installing a hard drive backplane
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. If installed,
remove the front
4.
Remove the air
shroud.
Steps
1. Use the hooks at the base of the system as guides to align the hard drive backplane.
2. Lower the hard-drive backplane into the system till the release pin locks in place, securing the hard drive backplane to the
system.
3. Connect the data, signal, and power cables to the backplane.
62
Installing and removing system components
Safety
instructions.
Before working inside your
bezel.
system.
Advertisement
Table of Contents
