Installing The Hard Drive Backplane - Dell W4X15 Owner's Manual

Related Links
Safety instructions
Before working inside your system
Removing a hot swappable hard drive carrier

Installing the hard drive backplane

Installing a hot swappable hard drive carrier
After working inside your system
Installing the hard drive backplane
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
CAUTION: To prevent damage to the control panel flex cable, do not bend the control panel flex
cable after it is inserted into the connector.
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Align the slots on the hard drive backplane with the hooks on the chassis.
2. Press down the hard drive backplane until the release tabs snap into place.
3. Connect the SAS/SATA/SSD data, signal, and power cables to the backplane.
168