QTech QSW-6900-56LF Series Hardware Installation And Reference Manual page 45

Installation Manual
9. Appendix C Cabling Recommendations in Installation
❖ The hard power cable should be fastened at the terminal connection area to prevent stress
on terminal connection and cable.
❖ Do not use self-tapping screws to fasten terminals.
❖ Power cables of the same type and in the same cabling direction should be bundled up into
cable bunches, with cables in cable bunches clean and straight.
❖ Binding by using buckles should be performed according to Table C-1.
Cable Bunch Diameter (mm)
10
10-30
30
❖ No knot is allowed in cabling or bundling.
Binding space (mm)
80-150
150-200
200-300
www.qtech.ru
45