QTech QSW-6900-56LF Series Hardware Installation And Reference Manual page 19

Installation Manual
3. Product Installation 19
❖ Fasten the cabinet.
❖ Insert various modules in the frame properly.
❖ Remove any obstacle in the frame and the surrounding environment.
❖ Prepare the equipment to be installed and move it to the place near the cabinet where you
can handle it easily.
Installing Mounting Brackets
Take out the two L-shape brackets and eight M4*8FMO countersink screws from the plastic
package.
Install the brackets at the side panels of the switch, and fix the brackets with four M4*8FMO
countersink screws at each side.
Figure 3-1 Installing Mounting Brackets
Mounting the Switch to a Rack
The QSW-6900-56LF series switches are qualified for EIA standard and can be installed in 19-inch
wiring cabinet. During the process of installation, keep the front panel of the switch forward. It
is recommended use tray to install the QSW-6900-56LF series switches and fix the tray on the
bracket, or use the rear bracket provided with the switches.
Figure 3-2 Mounting the Switch to a Rack
www.qtech.ru