3 OPERATION
3.1
General
The generating set is operational after full installation and
filling up with: fuel, engine lubricating oil and cooling liquid,
filling the starter battery with acid (WhisperPower batteries
do not need to be filled up and are sealed), connecting the
remote control panel.
1 Max. oil level;
2 Min. oil level.
Fig. 17: Engine oil dipstick markings
3.2
Operating Instructions
3.2.1
Summarised operating instructions (daily
use)
Routine "pre-start" checks:
1
Check oil level.
2
Water inlet (all valves open).
3
Power
source
selector
power/generator power). Switch to power source
switch "OFF", or switch off all consumers in the usual
way. If a WhisperSwitch is installed, this is operating
automatically.
4
Switch on battery switch (when installed).
5
Fuel valve: open.
Starting:
Push the start button to initiate the full automatic
starting procedure. You can monitor the procedure on
the display.
EN / M-SQ 27 / August 2020
switch
(off/shore
INFORMATION
21