Maintenance & Repair; Electrical Safety; Magnetism; Operation - Whisper Power ELITE GV 2 User Manual

GENERAL INFORMATION
2.1.4 Maintenance & repair
WARNING
When service has to be carried out while the
engine is running, be aware of moving parts.
If the Elite Genverter is switched off during maintenance and/or
repair activities, it should be secured against unexpected and
unintentional switching on:
• remove the AC supply;
•
remove the connection to the batteries;
•
be sure that third parties cannot reverse the
measures taken.
If maintenance and repairs are required, use original spare parts
only.
Always consult the manual before carrying out maintenance.
2.1.5

Electrical safety

Warning signs indicate parts which could be live.
•
Check all wiring at least once a year. Defects, such as
loose connections, burned cables etc. must be
repaired immediately.
• Do not work on the electrical system if it is still
connected to a current source. Only allow changes in
your electrical system to be carried out by qualified
electricians.
•
Connection and protection must be done in
accordance with local standards.
2.1.6

Magnetism

WARNING!
The genverter incorporates powerful permanent
magnets. Cardiac patients, especially those living
with a pacemaker, should bear this in mind.
2.1.7

Operation

There are no external moving parts like fans and V-belts. The hot
parts of the engine are covered by the sound shield and
therefore the Elite Genverter is very safe when the sound shield
is closed.
Nevertheless take note of the signs on the Genverter which show
symbols in a triangle indicating danger.
•
The Genverter should be operated by authorized
personnel only.
•
Be aware of hot parts and especially parts of the
exhaust system and the cooling system.
•
If the Genverter is unsafe, fit danger notices and
disconnect the battery positive (+) lead so that it
cannot be started until the condition is corrected.
•
Do not attempt to operate the Genverter with a
known unsafe condition. Disconnect the battery
6
positive (+) lead prior to attempting any repairs or
cleaning inside the enclosure.
•
Always consult the manual before carrying out
maintenance.
•
Do not change the settings without consulting the
manufacturer. Keep a record of setting changes in this
manual.
2.1.8

Fire and explosion

Fuels can be flammable. Proper handling limits the risk of fire and
explosion.
WARNING
Never use the Elite Genverter in situations where
there is danger of gas or dust explosion or
potentially flammable products!
•
Avoid refilling the fuel tank while the engine is
running. When oil or fuel is leaking do not use the
Elite Genverter.
•
Hydrogen gas possibly generated by batteries being
charged is explosive. Ensure proper ventilation. Do
not smoke or allow sparks, flames, or other sources of
ignition around batteries.
•
Keep a fire extinguisher on hand.
2.1.9

Chemicals

•
Fuels, oils, coolants, and battery electrolyte can be
hazardous if not treated properly. Do not swallow or
have skin contact with these liquids. Do not wear
clothing that has been contaminated by fuel or
lubricating oil.
•
On no account allow any unprotected skin to come
into contact with the injector spray as the fuel may
enter the blood stream with fatal results.
•
Engines may be fitted with seals or O-rings
manufactured from "Viton" or similar material. When
exposed to abnormal high temperatures in excess of
400°C an extremely corrosive acid is produced which
cannot be removed from the skin. If signs of
decomposition are evident, or if in doubt, always
wear disposable heavy duty gloves.
2.2

TRANSPORT, LIFTING AND STORAGE

When lifting the Genverter avoid any risk of personal injuries, do
not stand under the Genverter.
•
Use soft slings to avoid damage
•
On the engine is a lifting hoist eye which can be used
to take the Genverter out of the capsule. It can also
be used to lift the complete Genverter including the
capsule.
Elite GV 2, 3, 3+, 8, 10 and Elite GV 15 — June 2020 — EN