Table of Contents
Advertisement
Slide-in labels for Zones 1 -10 are included with the LED-10(s). In the event that these
labels are damaged or lost, remove this page from the manual and type the appropri-
ate information on the labels shown below. Type on the lines provided to ensure
centering of information in label windows. Carefully cut out the labels and insert them
into the two label slots on the top left side of the LED-10 annunciator face plate.
Note: To ensure the best fit, cut directly along the dotted line surrounding
Note: To ensure the best fit, cut directly along the dotted line surrounding
Note: To ensure the best fit, cut directly along the dotted line surrounding
Note: To ensure the best fit, cut directly along the dotted line surrounding
Note: To ensure the best fit, cut directly along the dotted line surrounding
each label.
each label.
each label.
each label.
each label.
Technical Manuals Online! - http://www.tech-man.com
Slide-In Labels for the LED-10
Slide-In Labels for the LED-10
Slide-In Labels for the LED-10
Slide-In Labels for the LED-10
Slide-In Labels for the LED-10
Label #1
Label #2
Custom User
Label #1
Custom User
Label #1
Document 50400
firealarmresources.com
Custom User
Label #2
Custom User
Label #2
Rev A
5/15/96
P/N 50400:A
21
21
21
21
21
Advertisement
Table of Contents
