Section Four - Fire-Lite Alarms LED-10 Manual

Section F

Section Four

Section F our our: : : : : LED-10 Electr our
Section F Section F our
The LED-10 can be powered by the MS-5210UD regulated power output or from a
remote, UL listed, filtered, regulated power supply such as the Fire•Lite FCPS-24F. The
power run to the LED-10 must be power-limited but need not contain a power supervi-
sion relay since loss of power is inherently supervised through loss of communication
with the LED-10. Maximum LED-10 current draw from the power supply under alarm
condition is 28 mA. Maximum current draw from the control panel's secondary power
source (batteries) under loss of AC power is 24 mA.
LED-10 LED-10 LED-10 LED-10 LED-10
Plug-in terminal blocks
Note: Note: Note: Note: Note: All connections are power-limited and supervised.
14 14 14
14 14
Technical Manuals Online! - http://www.tech-man.com
LED-10 Electrical Connections LED-10 Electr LED-10 Electr
LED-10 Electr
Earth Ground Option
Figure 4-1: Power Connection Figure 4-1: Power Connection
Figure 4-1: Power Connection Figure 4-1: Power Connection Figure 4-1: Power Connection
Document 50400
firealarmresources.com
ical Connections ical Connections ical Connections
ical Connections
n/c
+ 24 VDC
From Main Power Supply From Main Power Supply From Main Power Supply From Main Power Supply From Main Power Supply
- 24 VDC
+ 24 VDC
To next annunciator or ACM-8RF To next annunciator or ACM-8RF To next annunciator or ACM-8RF To next annunciator or ACM-8RF To next annunciator or ACM-8RF
- 24 VDC
Rev A 5/15/96 P/N 50400:A