Use The Appliance; Switching On And Off; Setting The Humidity Level; Changing The Fan Speed - Philips HU5930 User Manual

4

Use the appliance

Switching on and off

1
Put the plug in the power socket.
» The appliance sounds. For HU5931, all
lights go on once and then go out again.
2
Touch to switch on the appliance
(fig. q).
» The appliance operates under the auto
fan speed by default, and the default
humidity setting is "
» The current humidity level will display
on the screen.
3
Touch and hold for 3 seconds to switch
off the appliance (fig. r & s).
Note
•
After the appliance is switched off by the
on/off button , if the plug is still in the
power socket, the appliance will operate
under the previous settings when it is
switched on again.
Tip
•
Touch the light on/off button
on or off the indicator lights and display
screen.
•
Touch the temperature button
the current temperature will display on the
screen for 3 seconds. After that the current
humidity level will display (fig. t).

Setting the humidity level

1
Touch the humidity button
to set the desired air humidity to 40%, 50%
or 60% (fig. u).
•
•
•
".
•
•

Changing the fan speed

Auto ( )
In auto mode, the appliance selects the fan
speed in accordance with the ambient air
humidity.
to turn
1
once and
Manual
1
•
repeatedly
Note
When the humidity level "
the humidity light ring will be off. The
appliance will keep humidifying the room
until the ambient humidity level reaches
70%RH.
In the auto mode, the appliance will
operate under fan speed 1 when the target
humidity level is reached. In the manual fan
speed mode, the appliance will continue to
operate under the chosen fan speed.
When the target humidity level is reached,
the wick wheel will stop rotating. It will
start rotating again when the humidity
drops below the target level.
If you want to increase the humidity level
quickly, you can select a higher fan speed.
For HU5931, the air humidity light ring
indicates whether the target humidity
level is reached. It lights up blue when the
humidity level is reached and red when
the ambient humidity is below the preset
setting.
Touch the fan speed button
auto ( ) (fig. v).
Touch the fan speed button
to select the desired fan speed (1, 2, 3 or
4) (fig. w).
Note
Fan speed 4 is available for HU5931 only.
" is chosen,
to select
repeatedly
EN 7