Use The Appliance; Switching On And Off; Setting The Humidity Level - Philips 5000 Series User Manual

4 Use the
appliance

Switching on and off

1
Put the plug in the power socket.
» The appliance sounds. For
HU5931, all lights go on once
and then go out again.
2
Touch to switch on the appliance
(fig. q).
» The appliance operates under
the auto fan speed by default,
and the default humidity setting
is " ".
» The current humidity level will
display on the screen.
3
Touch and hold
to switch off the appliance (fig. r
& s).
Note
• After the appliance is switched
off by the on/off button
plug is still in the power socket, the
appliance will operate under the
previous settings when it is switched
on again.
Tip
• Touch the light on/off button
turn on or off the indicator lights
and display screen.
• Touch the temperature button
once and the current temperature
will display on the screen for
3 seconds. After that the current
humidity level will display (fig. t).
EN
22
for 3 seconds
, if the
to
Setting the humidity
level
1
Touch the humidity button
repeatedly to set the desired
air humidity to 40%RH, 50%RH,
60%RH or " " (fig. u).
Note
• When the humidity level "
chosen, the humidity light ring
will be off. The appliance will keep
humidifying the room until the
ambient humidity level reaches
70%RH.
• In the auto mode, the appliance will
operate under fan speed 1 when the
target humidity level is reached. In
the manual fan speed mode, the
appliance will continue to operate
under the chosen fan speed.
• When the target humidity level is
reached, the wick wheel will stop
rotating. It will start rotating again
when the humidity drops below the
target level.
• If you want to increase the humidity
level quickly, you can select a higher
fan speed.
• For HU5931, the air humidity light
ring indicates whether the target
humidity level is reached. It lights
up blue when the humidity level is
reached and red when the ambient
humidity is below the preset setting.
" is