Preparing For Humidification; Use The Appliance; Switching On And Off - Philips HU5930 User Manual

Preparing for
humidification
1
Pull out the water tank (fig. h).
2
Pull out the water tray (fig. i).
3
Remove all packaging material
of the NanoCloud rotary
humidification wick (fig. j).
Note
•
The humidification wick has been
assembled on the wick wheel upon
purchase.
4
Place the wick wheel on the wick
support (fig. k).
Note
•
When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
5
Place the water tray back into the
appliance (fig. l).
6
Turn the top cap of the water
tank anti-clockwise to unscrew it
(fig. m).
7
Fill the water tank with cold tap
water (fig. n).
8
Turn the top cap clockwise to tightly
lock it onto the water tank (fig. o).
9
Place the water tank back into the
appliance (fig. p).
4 Use the
appliance

Switching on and off

1
Put the plug in the power socket.
» The appliance sounds. For
HU5931, all lights go on once
and then go out again.
2
Touch to switch on the
appliance (fig. q).
» The appliance operates under
the auto fan speed by default,
and the default humidity
setting is "
» The current humidity level will
display on the screen.
3
Touch and hold
to switch off the appliance
(fig. r & s).
Note
•
After the appliance is switched
off by the on/off button
plug is still in the power socket, the
appliance will operate under the
previous settings when it is switched
on again.
Tip
•
Touch the light on/off button
turn on or off the indicator lights
and display screen.
•
Touch the temperature button
once and the current temperature
will display on the screen for
3 seconds. After that the current
humidity level will display (fig. t).
".
for 3 seconds
, if the
to
EN 7