6
Put the pre-filter back into the appliance.
Note
•
Make sure that the side with the two clips is
pointing towards you, and that all hooks of the
pre-filter are properly attached to the purifier.
7
To reattach the front panel, mount the
panel onto the top of the appliance first
(1). Then, gently push the panel against the
body of the appliance (2).
10
EN
4
Using the appliance
Understand the air quality
light
Air quality light color
Blue
Blue-violet
Red-purple
Red
The air quality light automatically goes on
when the appliance is switched on, and lights
up all colors in sequence. In a short time
the air quality sensors select the color that
corresponds to the ambient air quality.
Switch on and off
1
Put the plug of the appliance in the power
socket.
2
Touch
to switch on the appliance.
» The appliance operates under the auto
mode by default.
» After measuring the air quality for
a short time, the air quality sensor
automatically selects the color of the
air quality light.
Air quality level
Good
Fair
Unhealthy
Very unhealthy