Using The Appliance; Understand The Air Quality Light; Understand The Humidity Light Indicator; Understand The Auto Mode - Philips User manual User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
4 Using the
appliance
Understand the air quality
light
Color of the air quality light Air quality level
Blue
Deep purple
Purple
Red
The air quality light automatically goes on when
the appliance is switched on.
Note
The built-in air quality sensor measures the air
quality and automatically selects the appropriate
color of the air quality light. When the air is
clean, the color of the air quality light is in
blue or deep purple. When the air quality
deteriorates, the color of the air quality light
changes to purple or red.
Understand the humidity light
indicator
The appliance is equipped with a built-in
humidity sensor. The CURRENT HUMIDITY
lights (30%, 40%, 50% or 60%) show the current
humidity.
Note
The accuracy of the humidity indication is
approximately plus or minus 5%.
It takes some time to measure the humidity level
in the room..

Understand the auto mode

The built-in air quality sensor automatically
measures the ambient air quality, and selects the
most appropriate fan speed.
Understand the healthy air
protect alert
The filter lights indicate that the filter has to be
Excellent
cleaned or be replaced.
Good
Different healthy
Fair
air protect alert
Bad
lights
Filter light
flashes.
Filter light
flashes.
Filter light
flashes.
Filter light
flashes.
Understand the healthy air
protect lock
This appliance is equipped with the Healthy
air protect lock to make sure that the filters
are in optimal condition when the appliance is
operating. When the filter is almost full and has
to be replaced, the specific filter light (
When you do not replace the filter in time:
Follow this
/
Clean the pre-filter and
descale the humidification
filter.
Replace the Multi-care filter.
Replace the activated
carbon filter and the HEPA
filter.
/
Replace the humidification
filter and water softener.
/
) start to flash.
» The appliance stops operating and it
is locked.
» The specific filter light (
) illuminate continuously.
/
/
/
/
/
EN
11

Advertisement

Table of Contents
loading

Table of Contents