Mount Weather Station - Ambient Weather OBSERVER WS-1002-ARRAY User Manual

4.3.2 Mount Weather Station

There are two methods for attaching your weather station:
A. Option 1: Mounting Clamps. Fasten the mounting pole to your mounting pole or bracket
(purchased separately) with the two U-bolts, mounting pole brackets and nuts, as shown in Figure 7.
Tighten the mounting pole to your mounting pole with the U-Bolt assembly. Make sure your
mounting pole is as far away from the temperature sensor as possible, as shown in Figure 7.
B. Option 2: Swedged Pole Mount. Insert the swedged end of the included mounting pole
into the open end of any standard mounting pole solution (1 3/8" diameter) available from
Ambient Weather, as shown in Figure 8. For more information on mounting solutions, visit:
Version 2.1 ©Copyright 2019, Ambient LLC. All Rights Reserved.
Figure 7
http://www.ambientweather.com/amwemoso.html
Page 9