19. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
19.1 Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor
Removal Procedures
19.1.1
To Remove Front Grille
19.1.2
To Remove Electronic Controller
2. Remove the 3 screws on the Front Grille.
WARNING
3. Slide the 3 lock knobs on the upside of the
Front Grille to unlock position.
1. Lift to open the horizontal vane gently.
Figure 1
5. Removing 2 pieces of the Control Board Cover
by releasing the 5 hooks.
Figure 2
152
4. Hold both sides of the Front Grille
and remove it by pulling
toward yourself gently.
5 Hooks