Table of Contents
Advertisement
16 Disassembly and Assembly Instructions
• Cautions! When handling electronic controller, be careful of electrostatic discharge.
• Be sure to return the wiring to its original position.
• There are many high voltage components within the heat sink cover so never touch the interior during operation. Wait at least two minutes after
power has been turned off.
16.1. Indoor Electronic Controllers Removal Procedures
• Remove the screw at the middle of the Front Grille. (Fig. 1)
• Remove 4 caps and 5 screws at the bottom of the Front Grille. (Fig.1)
• Remove the Front Grille Complete. (Fig. 2)
WARNING
41
Advertisement
Table of Contents
